Browse Items (654 total)

Sort by Title [A-Z] | [Z-A]

Mullion of curvilinear east window. Mullion is moulded at both inner and outer faces. Inner face comprises: frontal fillet flanked at either side by hollow chamfer, quadrant, hollow chamfer. The moulding of the outer face comprises: frontal fillet flanked at either side by hollow chamfer, right-angled rebate and hollow chamfer. The sides of the…

Jamb and arch moulding of tomb niche. Moulding, from intrados, comprises: hollow chamfer, right-angled rebate, hollow chamfer, right-angled rebate, hollow chamfer. The elements grow larger as the moulding progresses from the inner to the outer face. This, though a simple design feature, is unusual in Irish mouldings and is seen rarely. A similar…

West door jamb, arch and hood moulding. Moulding from intrados comprises: quadrant, hollow chamfer, right-angled rebate, quadrant, hollow chamfer. The hood, from extrados to intrados comprises: frontal fillet, hollow chamfer, quadrant.

Jamb arch and hood moulding of eastern tomb of chancel. Moulding of jamb from intrados comprises: chamfer, roll, hollow, roll. The hood, from extrados inward comprises hollow, and roll (could be read as ogee). This moulding is fascinating, as it appears to be emulating a the double ogee found on similar tombs in of the Limerick/Kerry group - other…

Jamb, arch and hood moulding of flamboyant tomb niche. Moulding of jamb and arch from intrados comprises: ogee, quadrant, hollow chamfer, ogee. The hood, from extrados, comprises: quadrant, hollow chamfer, right-angled rebate, ogee. Ogees often occur in conjunction with this kind of elaborate flame like tracery, as at St. Nicholas, Galway.

Mullion, loose in stone store, only one side of the mullion has elaborate mouldings, the other side is simply chamfered. The moulded side comprises: central fillet flanked at either side by hollow chamfer, spike, hollow chamfer.

Jamb shaft running along reveal of east window. Moulding comprises, from angle: corner triple filleted roll flanked at either side by hollows and chamfers. This moulding looks Early English but is most likely fifteenth century, it looks similar to the work at Roscommon Dominican Friary, both in the jambs and in the tracery (both broken but…

Base of shaft at outer face of jamb. Moulding from top down comprises: chamfered fillet, bell with keel half way down, fillet, scroll, chamfer, plinth. This base is similar in type to those at Holycross, Kilconnell, Lorrah, Strade etc.

Moulding of tomb chest, moulding comprises: freestanding fillet, double ogee. Ogees are unusual and often occur in conjuction with Flamoboyant tracery.

Base of tomb niche jamb. Moulding comprises from top down: grooved roll, bell, flat surface at right angle, hollow chamfer, quadrant, flat surface, bell, flat surface at right angle, quadrant, hollow chamfer, plinth. The mouldings here are unusual, the two lower elements protrude from the bell as two square blocks with mouldings at their front…

South door jamb, arch and hood moulding. Jamb and arch moulding from intrados comprises: hollow chamfer, quadrant, hollow chamfer, right-angled rebate, hollow chamfer. The hood, from extrados comprises: frontal fillet, hollow chamfer, right-angled rebate, hollow chamfer.

Capital frieze running the length of the splayed door jamb. Moulding comprises, from centre: central frontal roll-and-fillet flanked above and below by fillet, hollow, and scroll.

Hood moulding of door. From extrados, moulding comprises frontal fillet flanked by quadrants, and at inner face, by a fillet, hollow and roll.

West door, moulding from intrados comprises: hollow chamfer, quadrant, hollow chamfer. The hood from extrados in comprises: frontal fillet, hollow chamfer, hollow chamfer. The jamb and arch moulding here is particularly close to that at Tuam, in the south door of the fourteenth-century choir. Although the hood mouldings are different, the manner in…

Door jamb and arch moulding, there is no hood included in this drawing because the hood exactly replicates the jamb. Moulding from intrados comprises: hollow, roll-and-fillet, hollow, roll-and-fillet, hollow.

Sedilia jamb, moulding from intrados comprises: (replica section) quirk, mitre, hollow, mitre, quirk, flat surface, roll, flat surface, quirk, keel, hollow, keel, quirk, flat surface, roll, flat surface, quirk, mitre, hollow, mitre, hollow, flat surface. The rolls here are very full and should be read as engaged shafts.

Mullion of sedilia, moulding comprises: frontal roll-and-fillet flanked at either side by roll and small hollow chamfer. Mullion is square at rear.

Sedilia base, moulding from top down comprises roll, hollow, roll-and fillet, hollow, fillet, roll. The middle roll-and-fillet forms a water-holding element.

Sedilia capital, moulding from top down comprises: roll-and-fillet, hollow, roll, hollow, fillet, bell, chamfered fillet as necking roll. An unusual capital, with small mouldings crammed at top and a very long bell - indicative of its early fourteenth-century date.

My Gothic Past Login | Register

© 2019 Trinity College Dublin